Grinders

Shrouded Right Angle Grinders

The 5” & 7” Shrouded Right Angle Grinders are ready to tackle your toughest grinding surface preparation needs. Whether you’re grinding coatings for spot cleaning or feathering for recoating, our grinders can handle the challenge with dust free ease.

5” Air Floating Head Grinder Part No. 195.5501

Novatek’s Shrouded Right Angle Grinders utilize a 3M™ brand Coating Removal Discs or CRD®. The advantage of this non-woven, open web disc is that it will remove residual coatings or impacted corrosion into the substrate after coating removal with the Shrouded Needle Scales or PPT, but will not destroy the surface profile produced by these tools. In accordance with SSPC surface specifications, it may be necessary to utilize more then one type of cleaning device to achieve SP-11 power tool cleaning to bare metal.

FEATURES AND BENEFITS:

Heavy Duty Motor • The 1.2HP Pneumatic and 120volt, 8.0Amp Electric Motors maintain speed under load to maximize coating removal.

Power Source • Single power source for PPT and Grinders standardizes all replacement bearings, vanes etc. Note: Air PPT’s rotational speed is 2300-3000 RPM Grinders rotational speed is 5500 RPM

Floating Shrouds • A flexible shroud with a 360º radial vacuum take-off insures even air flow and maximum capture of dust & debris. The floating shrouds can even utilize a full range of abrasives to tackle your toughest grinding needs.

7” Air Floating Head Grinder Part No. 195.5701

Model	Part No.	Weight	R.P.M.	Air Consum.	Air/Volt	Power
5” Air Shrouded Grinder	195.5501	7.5Lbs. (3.4kg)	5500	30cfm (840 lpm)	90 PSI	1.2Hp
7” Air Shrouded Grinder	195.5701	11.5Lbs. (5.2kg)	5500	30cfm (840 lpm)	90 PSI	1.2Hp
5” Elec. Shrouded Grinder	195.5551	10Lbs. (4.6kg)	0-3000	N/A	120 Volt	1200W 8Amp
7” Elec. Shrouded Grinder	195.5751	14Lbs. (6.4kg)	0-3000	N/A	120 Volt	1200W 8Amp

5” Elec. Floating Head Grinder Part No. 195.5551

7” Elec. Floating Head Grinder Part No. 195.5751


	*Shrouded Mini Grinder*

Problems grinding those tight, difficult to reach areas are now solved with Novatek’s shrouded Mini Grinder. The fixed head design allows grinding and coatings removal up to edges, corners and on irregular surfaces. The convertible design allows you to adapt 1.5” & 2” abrasive disks. The parallel vacuum takeoff permits grinding in tight areas only 2” wide. Novatek’s Shrouded Mini Grinders utilize a 3M™ Roloc brand Coating Removal Discs (CRD®). The advantage of this non-woven, open web disc is that it will remove residual coatings or impacted corrosion into the substrate. Novatek also offers a vast assortment of abrasives for surface preparation on wood, aluminum and steel. Whether you’re grinding coatings for spot cleaning or feathering for recoating, our grinders can handle the challenge with dust free ease.

Model	Part No.	Weight	R.P.M.	Air Consum.	Air Press.	Power
Shrouded Mini Grinder	195.1100	3Lbs. (1.2kg)	15,000	6cfm (156 lpm)	90 PSI	.5Hp
Shrouded Mini Grinder Kit	195.1105	5.8Lbs. (2.6kg)	15,000	6cfm (156 lpm)	90 PSI	.5Hp

Dust Free Universal Grinder Shrouds

For the first time ever, Novatek offers our renowned “Floating Head” Grinder Shroud for Bosch, Makita, Dewalt, Metabo, and B&D Grinders!

In less than 5 minutes you can retrofit your existing grinder into a total dust free surface grinder. Our unique

rubber diaphragm allows you to maneuver your grinder as if you have no shroud on it at all! The “Perma Seal” always stays in contact with the work surface, regardless of your angle of attack.

Our Floating Head Shrouds are quite simply the easiest, most effective and comfortable form of dust control available for your grinders!

2” ID Collar

2.375” ID Collar

1.7” ID Collar

Model	Part No.	Ring Size ID	Tools to Fit
5” Bull Nose Shroud	499.BU005	1.7” or 2”	B&D, Makita, Bosch, Dewalt, Metabo
5” Enclosed Shroud	499.U005	1.7” or 2”	B&D, Makita, Bosch, Dewalt, Metabo
7” Bull Nose Shroud	499.U007	2” or 2.375”	B&D, Makita, Bosch, Dewalt, Milwaukee


	[Home] [About Us] [Newsletter] [New Products] [Products] [Applications] [Downloads] [Contact Us]