LOGO9

PPT

PPT102
PPT202
PPT302
PPT602
PPT402
PPT502

These versatile, high production tools are ideal for the removal of coatings from both steel and concrete substrates. Quick change hubs with an assortment of abrasives enables you to rapidly remove everything from mastics and alkyds to epoxy coatings while containing hazardous dust. The Peening Preparation Tools ( PPT ), with star or beam cutters, will remove coatings from many piping and curved surfaces. If you need a tool that will do everything from profiling steel to removing hazardous coatings, the PPT is the tool that gets the job done.
PPT02

The Peening Preparation Tools utilize 3M™ brand Heavy Duty Tungsten Carbide tipped Rotopeen™ flaps. In accordance with SSPC surface preparation specifications it may be necessary to utilize more than one type of cleaning device to achieve SP-11.
PPT902

FEATURES AND BENEFITS:

Lightweight Tools                                                                                            • Can be used vertically and overhead

Available with Varying Cutting Media                                                               • Imitates a shot blast finish                                                                                 • Converts in one minute to accept other surface preparation media

Optimized Power Source Maintains Speed Under Load                                  • Maximizes coatings removal

Optional Accessories                                                                                         • Star cutters for tackling more demanding applications such as non-skid, PRC and coal tar removal                                                                                                   • Available with compressed air or electric drive motors, 2” or 4”  cutting widths

US Patented Vacuum Shroud                                                                          • Engineered specifically for lead based paint removal                                             • Maximizes debris capture and virtually eliminates detectable dust emissions        • Complies with OSHA and EPA standards easily when matched with VSE HEPA vacuums                                                                                                            • Vacuum ports as standard for dust free working
FLAP02

       C Flap       Removal of paint & rust

CUTTER03

         Star Cutter        Aggressive removal of thick coatings including non-slip
BEAM02

       Beam Cutter  Removal of hard coatings including epoxy

Contact Novatek for further information and advice on our complete (VSE) Vacuum Shrouded Equipment range.
PPT702

2” (50mm) Air version
PPT802

2” (50mm) Electric version
PPT1002

4” (100mm) Air version

Model

Part No.

Working Width

Weight

Length

Width

Height

R.P.M.

Air Consum.

Air / Volt

Power

2” Air with Flaps

194.0205

2.4”   (60mm)

7.5lbs (3.4kg)

14”  (356mm)

6.25”  (159mm)

6”   (152mm)

2700

30cfm  (840lpm)

90 PSI

1.2 HP

2” Air with Cutters

194.C205

1.97”  (50mm)

11.5lbs  (5.2kg)

14”  (356mm)

6.25”  (159mm)

6”   (152mm)

2700

30cfm  (840lpm)

90 PSI

1.2 HP

2” Air PPT Kit

139.0205

2.4”   (60mm)

18lbs    (8.2kg)

19” Tool Box

N/A

N/A

2700

30cfm  (840lpm)

90 PSI

1.2 HP

4” Air with Flaps

194.0405

4.3”   (110mm)

9lbs   (4.1kg)

14”  (356mm)

7.8”   (197mm)

6”   (152mm)

3000

30cfm  (840lpm)

90 PSI

1.2 HP

4” Air with Cutters

194.C405

3.9”   (100mm)

14lbs    (6.4kg)

14”  (356mm)

7.8”   (197mm)

6”   (152mm)

3000

30cfm  (840lpm)

90 PSI

1.2 HP

4” Air PPT Kit

139.0405

4.3”   (110mm)

23lbs  (10.4kg)

22” Tool Box

N/A

N/A

3000

30cfm  (840lpm)

90 PSI

1.2 HP

2” Electric with Flaps

194.0215

2.4”   (60mm)

10lbs    (4.45kg)

20”  (508mm)

6.25”  (159mm)

6”   (152mm)

2300

N/A

120v

1200W 8AMP

2” Electric with Cutters

194.C215

1.97”  (50mm)

14lbs    (6.4kg)

20”  (508mm)

6.25”  (159mm)

6”   (152mm)

2300

N/A

120v

1200W 8AMP

2” Electric PPT Kit

139.0215

2.4”   (60mm)

23lbs  (10.4kg)

22” Tool Box

N/A

N/A

2300

N/A

120v

1200W 8AMP

4” Electric with Flaps

194.0415

4.3”   (110mm)

14lbs    (6.4kg)

20”  (508mm)

7.8”   (197mm)

6”   (152mm)

2300

N/A

120v

1200W 8AMP

4” Electric with Cutters

194.C415

3.9”   (100mm)

16lbs    (7.2kg)

20”  (508mm)

7.8”   (197mm)

6”   (152mm)

2300

N/A

120v

1200W 8AMP
[Home] [About Us] [Newsletter] [New Products] [Products] [Applications] [Downloads] [Contact Us]